Instruction

How to Use Your Joypur Water Filter System

Welcome to Joypur’s step-by-step instruction guide. Whether you’re setting up your water filter for the first time or performing routine maintenance, this guide will help you get the best out of your Joypur Water Filter System. Follow the steps below for a smooth setup and proper care.

1. Unboxing and Parts Overview

Your Joypur Filtration System package will include components based on the model and package you purchased. Below is a general checklist of items that you may find in your package:

  • Water Chamber
    (The size and design of the chamber will vary depending on the specific model purchased.)
  • Antislip O-ring
    (Helps secure the system and prevent movement.)
  • Metal Stand
    (Included in select packages for elevating the system.)
  • Black Filter
    (The number and type of filters, such as fluoride or composite filters, depend on the model you chose.)
  • Manual
    (Comprehensive guide for assembly, maintenance, and usage.)
  • Screwdriver
    (Provided for easy assembly of the system components.)
  • Wrench
    (Used for tightening the spigot and other parts.)
  • Metal Spigot
    (Premium spigot for smooth water dispensing.)
  • Hole Plug
    (Used to seal any unused filter slots, depending on the model.)

*If your purchase includes additional filters or components, please note that the quantity may vary depending on the model.

2. System Setup

Step 1: Wash the Components

  • Before first use, thoroughly wash all parts (except the filter cartridge) with warm, soapy water. Rinse each part carefully to remove any soap residue.

Step 2: Install the Spigot

  1. Unscrew the nut from the spigot.
  2. Place a stainless steel washer and a white silicone washer onto the spigot's threaded stem.
  3. Insert the spigot through the hole in the lower water chamber.
  4. On the inside of the chamber, place the white silicone washer followed by the stainless steel washer on the threaded stem.
  5. Secure the spigot in place by tightening the nut with the provided wrench to ensure a leak-free fit.

Step 3: Prepare the Filter Cartridge

  1. Soak the filter cartridge in clean water for 10-15 minutes to activate the filter media.
  2. Rinse the cartridge under running water to remove any loose particles.

Step 4: Install the Filter Cartridge

  1. Remove the protective cover from the filter.
  2. Unscrew the wing nut and remove the silicone washers.
  3. Insert the filter through the pre-drilled hole in the upper water chamber.
  4. Place one silicone washer on the top side of the filter stem, and the second on the underside inside the chamber.
  5. Secure the filter by screwing the wing nut onto the stem from the inside. Note: Tighten by hand, but do not overtighten.

Step 5: Assemble the Water Chambers

  1. Position the upper water chamber on top of the lower water chamber, ensuring they align securely.
  2. Twist and lock the chambers if necessary, based on your model.

Step 6: Add Water

  • Fill the upper chamber with tap water.
  • Note: Be careful not to overfill the upper chamber, especially if the lower chamber is already full. Adding more water to the upper chamber when the lower chamber is full may cause leakage from the gap between the containers.

3. How to Use the Filter System

  1. Dispensing Water: Use the spigot to dispense water from the lower chamber. Make sure to keep the lid on the top chamber to prevent dust and contaminants from entering the water.
  2. Refilling: Regularly check the water levels. Refill the upper chamber as needed to ensure a steady supply of clean water.

4. Maintenance and Filter Replacement

Step 1: Cleaning the System

  • It's recommended that you clean the entire system once a month. Disassemble the water chambers and spigot, and use mild soap and a soft cloth to clean each part. Rinse thoroughly and reassemble the system.

Step 2: Filter Replacement

  • Replace the filter cartridge every 6-12 months, depending on usage and water quality.
  • To replace the filter, follow the same steps outlined in the initial setup (Step 3). Soak and install the new filter as instructed.

5. Troubleshooting

  1. Slow Water Flow: If the water flow slows down, the filter may need cleaning or replacement. Follow the maintenance steps to clean the filter or replace it.
  2. Leakage: Check the spigot and filter installation. Ensure the spigot is tightly secured and the filter is properly locked in place.
  3. Strange Taste or Odor: If the water has an unusual taste or smell, it may be time to replace the filter. Refer to the replacement instructions in the maintenance section.

6. FAQs

  1. How often should I clean my Joypur filter system?
    We recommend cleaning the entire system once a month to maintain optimal performance and ensure the best quality of filtered water.
  2. How long does the filter last?
    The filter lasts between 6 to 12 months, depending on water quality and usage. Regular maintenance, such as cleaning the system, can help extend the filter's life.

For more FAQs, visit our [FAQ page].